Rear Roller Replacement - Matrix T1XE-04 Service Manual

9.2 rear roller rePlaCemeNT

1) Remove one of the rear end caps using a Phillips screwdriver (Figure A).
2) Remove both roller adjustment screws using an 8 mm Allen wrench (Figure B).
fiGUre a
3) Remove the rear roller from the running belt (Figures C & D).
fiGUre C
4) Reverse Steps 1-3 to install a new rear roller.
5) Test the treadmill for function as outlined in Section 9.21.
CHaPTer 9: ParT rePlaCemeNT GUide
fiGUre b
fiGUre d
47