System & Station
Program 33 – [PDN]/ [PhDN] Station Hunting (Voice Calls Only)
Program 33 – [PDN]/ [PhDN] Station Hunting (Voice
Calls Only)
Processor Type:
Program Type:
Initialized Default:
ÃÆ
Æ
!
Processor
DK14
DK40i
RCTUA
Hunt From
Hunt To
Program 33 Overview
Program 33 assigns Station Hunting to [PDNs] or [PhDNs]. When a called station is busy, the
Station Hunting feature will ring the alternate "hunt to" [PDNs] or [PhDNs] defined in this
program. If the "hunt-to" [DN] is busy, the system will try to ring the next "hunt-to" [DN], and so
on.
If a "hunt-to" [DN] is in the Call Forward mode, the call forward will have priority over the hunt.
A ground/loop start CO line will hunt from a [PDN] or [PhDN] only if it has been assigned to
immediate ring at the owner station of the [PDN] or [PhDN] exclusively (in Programs 81, 84, or 87
and
81,
84, or
87).
3-90
DK14, DK40i, All RCTUs
Station
Blank
"
Tx
" " Cyq
Tx
SELECT = [PDN] or [PhDN] Port
Reference Number of the "hunt-from"
station.
To add a port range, enter XXX
(low port
high port).
[PDN] Port Range
[PhDN] Port Range
000~009
500~509
000~027
500~527
000~031
500~531
Hunt From
Æ
Cyq
HUNT TO = [PDN] or [PhDN] Port Reference
Number of the "hunt-to" station.
Press LED Button 01 to delete digit from the
XXX
"hunt-to" port.
Processor
RCTUBA/BB
RCTUC/D
RCTUE/F
Hunt To
Hunt From
Tx
Æ Æ Cyq
Tx
Æ Æ Cyq
[PDN] Port Range
[PhDN] Port Range
000~079
000~239
000~335
Hunt To
Hunt From
Strata DK Programming 5/99
500~579
500~739
500~835
Hunt To