Toshiba Strata DK14 Programming Manual page 127

LED 09 should be OFF for VM Auto Attendant "blind" transfer and VM tandem CO line
connection with automatic release. LED 09 should be ON for VM Auto Attendant supervised
transfer operation.
Example Programming Assignment to Set Up Voice Mail in a Distributed Hunt Group
Program *32
Program 13
Program 31
Program *40
Telephones
#200
using voice mail
#201
machine #1
Telephones
#202
using voice mail
#203
machine #2
All ports assigned to a Voice Mail Group should also be assigned to a unique Distributed Hunt
Group using Program 40. Each Program 31 Voice Mail Group must be associated with a unique
Program 40 Distributed Hunt Group that hunts only to its own Voice Mail Group ports. (See
above example of how to connect/program two voice mail/auto attendant machines and associate
them with two different DH groups.)
If LED 15 or 19 is ON, turn LED 17 ON. If LED 20 is ON, turn LEDs 17 and 19 ON.
For SMDI or DTMF integration, turn ON LEDs 04, 16, 17 and 18, and one of the following:
05, 06, 07, or 08 for all standard telephone ports connected to a VM unit.
Turn LED 19 and 20 OFF if the VM unit does not respond properly to transfer recall (B-Tone)
signals when using any type of Voice Mail Interface.
LED 09 – see above comments in Program Overview.
If CO lines direct ring VM ports via Program 81~89, the data in Programs 81, 84, and 87
must be blank.
Do not assign Program 31 VM/AA options to built-in Auto Attendant digital
Important!
announcer ports.
Strata DK Programming 5/99
008 VMG1 Message Center
010 VMG2 Message Center
008 – Button 5 ON
VMG1 RSTU VM Ports
009 – Button 5 ON
010 – Button 6 ON
VMG2 RSTU VM Ports
011 – Button 6 ON
850 – 01 008
VMG1 DH Group Members
850 – 02 009
851 – 01 010
VMG1 DH Group Members
851 – 02 011
RS232C (SMDI)
N/A on DK14
#008
#009
008
#010
#011
010
Standard Telephone
Voice Mail Ports
Program 31 – Station Class of Service
DHG1/VMG1
DHG2/VMG2
System & Station
Voice Mail
Machine #1
Voice Mail
Machine #2
1565
3-81