Toshiba Strata DK14 Programming Manual page 95

Program 16 Overview
Use Program 16 to assign each CO line to a CO line group or a general "dial 9" group. A general
group for outside calling is available with a "dial 9" access code as the initialized state for all lines.
Lines can be accessed with a dialing code instead of with a CO
WATS lines or other facilities, and is heavily used in Least Cost Routing and Pooled Line Button
assignments.
Do not attempt to assign a line to more than one group. A line need not be assigned to a group. If
lines are not used, they should be taken out of all groups, including the "dial 9" group. Automatic
Busy Redial (ABR) will not function if unconnected (unused) lines are assigned to a line group.
After programming, press:
9RO
to turn all LEDs ON
9RO
to turn all LEDs OFF
0RGH
and CO line number, then
Strata DK Programming 5/99
Program 16 – Assign CO Line Groups (or Dial 9)
/LQH
to display and advance
System & Station
button. This is useful for
3-49