System & Station
Program 02 – Station Physical Port Display and/or Change
Program 02 – Station Physical Port Display and/or
Change
Processor Type:
Program Type:
Initialized Default:
ÃÆ
ÃÆ
Ã!
Ã"
SELECT = Logical Port Number
The physical port number associated
with the logical telephone port displays
after the logical port number is entered.
Program 02 Overview
Program 02 enables you to enter a logical port to display the associated physical port. You then
have the option to assign a new physical port to the logical port. (To return ports to their initialized
settings, see Programs 90 and 91.)
Notes
Record port locations on Program 04 record sheet.
The system allows only like ports to be reassigned (see below).
Digital-to-Digital Ports (KCDU-QCDU-PDKU-
PDKU-RDSU Ports)
Electronic-to-Electronic Ports (PEKU-PEKU-
PESU Ports)
Standard Tel to Standard Tel Ports (QSTU-
KSTU-PSTU-RSTU-PESU-RDSU/RSTS)
RCIU/RCIS circuit assignments to CO lines are not affected by Program 01 and 02.
3-2
DK14, DK40i, All RCTUs
Station
Logical port number = physical port number
Program 90, 91-1, or 91-9 initializes Program 02
To Save existing Physical Port
Tx
! Cyq
Tx
Processor
[PDN] Port Range
DK14
000~009
DK40i
000~027
RCTUA
000~031
Allowed
Tx
Cyq
Tx
Æ Æ Cyq
Enter new Physical Port
to change existing Physical Port
Processor
[PDN] Port Range
RCTUBA/BB
RCTUC/D
RCTUE/F
Not Allowed
Attendant Console (DK424 only), DSS, BGM
or Amplified Conference Ports should not be
reassigned
Door Phone Ports (004, 012, 020, 028) should
not be reassigned
Tie/DID Line Ports – should not be reassigned
PDKU to PEKU – cannot be exchanged
PSTU to PDKU – cannot be exchanged
PEKU to PSTU – cannot be exchanged
Tx
Æ Æ Cyq
000~079
000~239
000~335
Strata DK Programming 5/99