Program 31 - Station Class Of Service - Toshiba Strata DK14 Programming Manual

System & Station
Program 31 – Station Class of Service
Program 31 – Station Class of Service
Processor Type:
Program Type:
Initialized Default:
ÃÆ ÃÆ Ã! Ã" 
SELECT = Station Logical Port Number(s)
Enter the port numbers to which class of service
must be assigned.
Feature
Toshiba Stratagy/VP (B + Station No.)
Toshiba Stratagy/VP (B No Station)
Executive & Privacy Override Blocking
End/End Signal Rcv (VM)
Receive VM ID Code
Toshiba Stratagy/VP Integration (A/D)
Handset OCA
Handset OCA Warning Tone
Pooled Line Key - No Flash if No Ring
Busy Override Tone - Continuous
All Call Page Allowed - EKTs/DKTs
VM (No Conference)
VM Group 4 (does not apply to DK14)
VM Group 3 (does not apply to DK14)
VM Group 2
VM Group 1
VM to VM Call Blocking Called/Calling
OCA Enabled (To Receive)
Handsfree No Warning Tone
Handsfree Disabled
Program 31 Overview
Program 31 sets most voice mail or External Auto Attendant port assignments. Each standard
telephone port (QSTU2, RSTU2, RSTU, PSTU, PESU, RDSU, KSTU2, QSTU2) connected to a
Toshiba Stratagy, Stratagy DK or VP voice mail system should have LEDs 04, 15, 16, 17, 18, 19,
and 20, and one of the following: 05, 06, 07, or 08 turned ON. These LED's should be ON for VM
ports only, not for telephone ports.
3-80
DK14, DK40i, All RCTUs
Station
LED 10 ON for Ports 000~119 ; LED 11~13 ON for all ports.
Tƒx… " C‚yq  Tƒx…
Processor Type Port Range
DK14 000~009
DK40i 000~027
RCTUA 000~031
LED
Æ C‚yq 
Light LED Buttons for the port specified in the last
step. All LED Buttons marked with an "X" in the
table below should be lit.
Processor Type
RCTUBA/BB
RCTUC/D
20
19
18
17
16
15
14
13
12
11
10
09
08
07
06
05
04
03
02
01
Tƒx… Æ Æ C‚yq  Tƒx… Æ Æ C‚yq
Port Range
000~079
000~239
RCTUE/F 000~335
Port
Strata DK Programming 5/99