Toshiba Strata DK14 Programming Manual page 182

System & Station
Program 59 – Attendant Console Flexible Button Codes
Program 59 Overview
Attendant Consoles have 24 flexible buttons (12 on left and 12 on the right side of the dial pad).
This program is used to assign each button to an available function or options. Program 59 record
sheets define the button options (and codes) available.
Table 3-2 Required PC Attendant Console Button Codes
Button Function
Conference
Hold Recall
Incoming Dial "0"
Incoming Directory Number
Incoming Ring Transfer
Join-Loop
Out Dial
Redial Last Number (
Release to Idle
Speed Dial Select (
Split Call
Supervised Loop
Transfer Recall
Attendant Call
Table 3-3 Recommended PC Attendant Console Button Codes
Button Function
Display BLF
Incoming Emergency
Message Waiting/Flash
Overflow
Park Recall
Table 3-4 Incoming Line Group Button Assignments
Table 3-5 Optional Attendant Console Button Codes
Button Function
Alarm
Call Pickup Tenant 1~Call
Pickup Tenant 4
3-136
Button Labels
Conf
Hold-RC
In-Dial "0"
In-DN
In-Trans
Join-Loop
Out Dial
Æ ) Redial or RDL
Release Call or RLS
) Speed Dial or SDS
Split
Sup Loop
Trans-RC
Attd Call
Button Labels
BLF
In-Emrg
Msg Wait, Flash or MW/FL
Overflow
Park-RC
In-LG1~241 In-LG5~245
In-LG2~242 In-LG6~246
In-LG3~243 In-LG7~247
In-LG4~244 In-LG8~248
Button Labels
Alarm Reset or ALRM
PKUP 1~PKUP 4
Code
297 Starts conference calls.
259 Held calls recall on this button.
262 Dial "0" calls ring in on this button.
Incoming calls to the console DN ring on this
button. The console [DN] is the Prog 04
257
assignment of the Prog 04 console port
number.
258 Receive call transfer.
293 Connects any held call to an existing call.
Switches ATTD consoles dial pad from digital
294
to tone mode.
496 Redials the last number.
476 Releases current call and makes station idle.
497 Begins speed dial selection.
Allows attendant to talk to either party
295
separately on a conference call.
Places call on attendant hold loop key so
296
attendant can supervise call.
No answer transferred calls, recall on this
260
button.
Can originate calls on this button. The
000 Attendant Call LED is lit red any time the
attendant talk path is connected.
Code
298 Displays BLF on CRT or EL display.
Indicates to all consoles an incoming
261
emergency call.
Indicates a message from station or VM
device to Attendant. Disconnects and recalls
499 dial tone on CO line; accesses Centrex or
PBX features; enters pause or flash during
speed dial programming.
299 Places console in the call overflow mode.
263 Parked calls recall on this button.
In-LG9~249 In-LG13~253
In-LG10~250 In-LG14~254
In-LG11~251 In-LG15~255
In-LG12~252 In-LG16~256
Code
477 Resets alarm condition system-wide.
Picks up tenant 3's ringing CO calls.
435~438
Strata DK Programming 5/99
Notes
Notes
Notes