Toshiba Strata DK14 Programming Manual page 35

Program 90 Example
1. Use the LCD programming phone per Minimum Hardware
Requirements on -14.
Enter Program mode by pressing
2.
[DN] button.)
6SNU 6SHDNHU  +ROG
3.
Access Program 90. System beeps after
pressed to indicate program number may be entered.
6SNU 6SHDNHU
4.
Prepare the system for the programs to be initialized.
 + LED buttons 01 & 02
5.
Enter Program numbers individually, followed by #, or in a range. For a
range, separate the low program number and the high program
number with an asterisk.

initializes all Programs 00~
Star Program memory follows Program 97.
+ROG
6.
Secure data in system programming. LEDs 01 and 02 flash.
6SNU 6SHDNHU
7.
Prepare system for another selection (go back to Step 5) or exit
Program 90 (continue with Step 8).
+ROG
8.
Secure default data in system memory. LED 01 and 02 continue to
flash.
6SNU 6SHDNHU
9.
Exit Program 90. Enter another program number (see
Example" on Page 2-10) or exit programming mode (go to Step 10).
System beeps to indicate it is exiting Program 90.
+ROG
10.
Exit programming mode.
The system will not allow the
enter the programming mode.
1. N-N is the Program Telephone [DN].
Strata DK Programming 5/99
Action
   (Do not press
6SNU 6SHDNHU
99.
"Program 92
6SNU 6SHDNHU
LED to light to re-
Program 90 – Initialize Programs 00~*99
LCD Response
Jan 20 Sun
Program Mode
Program = 90
is
90 Select =
90 Select = 00**99
Data Clr
90 Select = 00**99
Data Programmed
90 Select =
90 Select = ##
Data Programmed
Program =
Jan 20 Sun
Initialization & Test
1
No. N-N
06:43
Data Store
No. N-N
06:43
2-5