Program 91-2 - Data Transfer From Temporary Memory To Working Memory - Toshiba Strata DK14 Programming Manual

Initialization & Test
Program 91-2 – Data Transfer from Temporary Memory to Working Memory
Program 91-2 – Data Transfer from Temporary Memory
to Working Memory
Processor Type:
Program Type:
Initialized Default:
ÃÆ ÃÆ Ã! Ã" 
Enter programming mode.
(Do not press [DN] button.)
Program 91-2 Overview
Program 91-2 simulates turning system power OFF for five seconds then ON to transfer data from
temporary memory to working memory.
This power OFF / power ON sequence is required when programming with a telephone or when
using DK Admin/DK Backup. In these cases Program 03, 41-2, 50 and 76-1 data must be
transferred from temporary to working memory.
Program 91-2 does not change or erase any programmed data including directory numbers set in
Program 04 and *04 or logical/physical port assignments in Program 01 and 02.
CAUTION!
2-8
DK14, DK40i, All RCTUs
Initialization
See individual programs
Tƒx… ( C‚yq  Tƒx… !
Running Program 91-2 drops all calls and renders the system inoperative for
up to eight seconds.
Program Telephone Exits Program Mode and Transfers Data
" # C‚yq 
Press LED Buttons 03 and 04.
LEDs 03 and 04 must be ON.
LCD Displays: 91 SELECT = 2
Programming
Taking Effect
Strata DK Programming 5/99