Toshiba Strata DK14 Programming Manual page 78

System & Station
Program 10-2 – System Assignments, Part 2 of 3
LED 15: External Page Included with All Call Page
External speakers and all electronic and digital telephones are paged by dialing: Directory Number
[DN] +
external speakers are not included when using the button.
If the All Call voice page access code (
incoming Tie, DID or DNIS lines, external page (all zones) may be included with All Call
telephone speaker paging. This option does not affect the
activates electronic and digital telephone speakers only, never external page (See Program 17,
LED 01 and Program 71).
LED 14: Privacy Override Warning Tone
Privacy Override allows a station user to enter an existing CO line conversation by pressing a CO
/LQH
button (if the called station is assigned in Program 30). A warning tone can be set optionally
to be heard by the conversing parties.
LED 13: Auto Callback Camp-on Tone
A busy called digital or electronic telephone user may optionally hear a one-time beep tone (from
the speaker) signifying that another station has tried to call and has activated the Automatic
Callback feature.
LED 12: CO Line Beep Tone
If this LED is lit, a beep tone will be sent every three minutes to stations on outgoing line calls.
LED 11: Dual-tone Multi-frequency (DTMF) Tone Return
This option deletes DTMF tones that are returned to digital or electronic telephones when
manually dialing or speed dialing. It also eliminates auto dial digits returned to callers when digits
are automatically sent to voice mail ports on forwarded calls.
LEDs 10 and 09: Background Music/Music-on-Hold Separation
An alternate Background Music (BGM) source can be sent to digital telephone speakers,
electronic telephone speakers, and external page speakers, while another Music-on-hold (MOH)
source can be sent to lines or internal stations on hold.
The alternate BGM source can be connected to either circuit 3 on a PEKU PCB, circuit 8 on a
PESU PCB, or circuit 2 on a PSTU, KSTU2, RDSU, RSTU2, RSTU, or QSTU2. LEDs 09 and 10
should be OFF for RSTU2, RSTU, RDSU, KSTU2, QSTU2, and PSTU alternate BGM. Also run
Program 19 to assign BGM to a PCB slot number.
DK14, DK40i: The normal MOH source can be connected to the MOH RCA jack on the
DK14 KSU or on the DK40i KSU.
DK424: The normal MOH source always connects to an RCTU. Also run Program 19 to
assign BGM to a PCB slot number.
When disabled (LED 10 OFF), deletes DTMF tones returned to digital and electronic telephones
when dialing from dial pad or speed dialing; also deletes auto dial digits from callers that are call
forwarded to voice mail. This does not affect the actual DTMF tones sent out to trunks or voice
mail devices.
When disabled (LED 09 OFF) BGM connected to the PEKU or PESU is sent to electronic and
digital telephone speakers and external page (optional). To assign the BGM PCB slot number, see
Program 19-1.
PESU/PEKU can be in any universal slot assigned in Program 19-1.
3-32
 $OO &DOO 3DJH
. The button is used to page all digital and electronic telephones only;

) is entered, or if the paging number is dialed on
$OO &DOO 3DJH
button function, which
Strata DK Programming 5/99