Conference Calls; Caller Id - Toshiba DP 5000 Series Quick Reference Manual

Conference Calls

To setup a conference call
1. While on a call, press "Cnf/Trn".
2. Call another station or outside line.
3. When the called party answers, press "Cnf/Trn". All parties are conferenced.
Note: If you receive a busy tone or if the station does not answer, press the flashing green line button to
return to the original call.
4. Repeat Steps 1~3 to add more lines. You can conference up to eight parties.
To conference two outside callers
1. While talking on an outside call, press "Cnf/Trn".
2. Access an outside line by dialing 9 followed by the number you wish to dial.
3. After the party answers, press "Cnf/Trn" twice and hang up.
Note: If you receive a busy tone or if the station does not answer, press the flashing green line button to
return to the original call.

Caller ID

To scroll through a list of numbers that called your telephone
Note: The following steps require your telephone to have a programmed feature button for
Caller ID.
1. Press the "Caller ID" button.
2. Use "Vol" Key or NEXT and PREV softkeys below the LCD screen to scroll through the numbers.
3. Press the CALL softkey to dial the number.
.
.
8