Toshiba Strata DK14 Programming Manual page 37

Program 91-1 Example
Action (press buttons + LED Buttons)
1. Use the LCD programming phone per Minimum Hardware
Requirements on -14.
  
2.
Enter programming mode. (Do not press [DN] button.)
6SNU 6SHDNHU  +ROG
3.
Access Program 91. System beeps after
pressed to indicate program number may be entered.
6SNU 6SHDNHU
4.
Prepare the system for a station port selection.
Press 
5.
Press LED Buttons 01 and 02 (LEDs turn ON)
6.
Press +ROG
7.
The telephone will exit the programming mode and button LEDs 01
and 02 will go out after a short delay.
1. N-N is the Program Telephone [DN].
Strata DK Programming 5/99
Program 91-1 – Automatic PCB Recognition and Port Renumber
6SNU 6SHDNHU
is
Initialization & Test
LCD Response
No. N-N
Jan 20 Sun
Program Mode
Program = 91
Data Store
91 Select =
91 Select = 1
Renumber and Reset
91 Select = 1
Renumber and Reset
(Month Day Time)
1
06:43
No. N-N
2-7