Operation - JTS UF-20R Product Manual

6. Operation

6-1 Operation settings for Wideband True Diversity Receiver //
UF-20R/UF-20S
6-1-1. Turn the receiver power on.
(1) Install the receiver antenna.
(2) Push the power button
the power on
(3)To turn off: push and hold the power
button till the display shows
"Power Off. "
6-1-2. REMOSET function:
(1) Push the REMOSET button and the blue indicator starts to flash, indicating the receiver
is transmitting data (Figure 1).
*When using the REMOSET function of UF-20R, it is recommended to carry out RE-
MOSET one by one. This is to prevent the interference between the REMOSET signals
and the failure of data transmitting.
29
Professional Wideband True Diversity System (75MHz)
to turn
1
SETUP
PUSH / CONTROL
EXIT
Figure 1
UF-20R
wireless receiver