5. Low Cut
(1) Press ▲、▼ to select"Low Cut. " Press SET to enter into the "Low Cut"
setting screen.
(2) Press ▲ to turn on the Low Cut function.
(3) Press ▼ to turn off the Low Cut function.
5. Device ID: to set the Device ID
(1) Press ▲、▼ to set the ID. Press SET to enter into "Device ID" setting
screen.
(2) Press ▲、▼ to adjust the pre-set ID value. The range is from 0 ~ 255.
After the adjustment, press SET to go to ID setting: On / Off
ID: On → The ID of the microphone and the ID of the receiver shall be the
same as to use the REMOSET function.
ID: OFF → Ignore the ID value. The microphone will receive all REMOSET
information transmitted by"receivers with ID code"
Press SET for setting.
This setting will affect the usage of REMOSET.
49
Professional Wideband True Diversity System (75MHz)
Frequency
Group/Chan
Sensitivity
Attenuate
Low Cut
Low Cut
ON
Low Cut
OFF
Device ID
Remoset
RF Power
Contrast
Light Time
Device ID
1
ID : ON
Device ID
1
OFF /
ON