Power Button - JTS UF-20R Product Manual

6-2 Handheld transmitter system operation setting // JSS-20

6-2-1 Power button

(1) Turn on the power
Power On: press POWER
Power Off: press POWER for approx.
1 second till the screen displays "Power OFF. "
Note: when pressing the POWER button,
"Mute ON" or "Mute OFF"(in mute state) will first
appear and then "Power OFF. "
(2) Mute mode: when using the transmitter (screen at the main
screen)
To set mute status: short press power button and the screen will dis-
play "Mute ON. " When it is in mute status, the power indicator light
will flashing in red. The screen will go to mute screen.
Mute OFF: short press power button and the screen will display
"Mute OFF".
(3) Exist setting menu
When it is in the setting menu: press Power button to go back to the
main screen.
When it is in the setting page of menu: press Power button to go back
to the main setting menu, press again to go back to the main screen.
** When the battery level is too low, the screen will display "Battery
Low. " The transmitter will automatically shut down after 30 minutes
(approximately).
41
Professional Wideband True Diversity System (75MHz)
30
Power
LED
Fig. 3
Mute On
Mute Off
Battery
Low