Table of Contents
Advertisement
e. Reset
(1) Rotate the rotary switch to "e. Reset" Push the rotary switch
(or SETUP) to enter the setting menu.
*Once reset, all the settings will be returned to factory
defaults. If REMOSET is needed, please check that the ID
is the same as that of transmitter.
(2) Push SETUP to reset.
f. Key Lock: to set the keypad lock
(1) rotate the rotatory switch to "f. Key Lock" and press the
rotatory switch (or select SETUP) to enter into the setting
screen.
(2) Rotate the rotatory switch to select "Lock ON". After con-
firmation, select SETUP to save the setting; "Lock ON"can
lock up the keypad of the receiver panel and prevent
misoperation touch.
Right side receiver can lock up: REMOSET, SETUP, rota-
tory switch, EXIT and POWER.
Left side receiver can lock up: REMOSET, SETUP, rota-
tory switch and EXIT.
(3) After KEYPAD LOCK, press any of the keypad the screen
will show the Unlocked information.
(4) Lock OFF: press SETUP for two seconds and enters
directly into "KeyLock" setting screen. Rotate the rotatory
switch to select "Lock OFF" and press SETUP to save the
keypad setting.
M
c. User Name
E
d. Contrast
N
e. Reset
U
f. Key Lock
This will erase all data
from receiver's Internal
Storage.
Press
2 sec to Reset
S
M
c. User Name
E
d. Contrast
N
e. Reset
U
f. Key Lock
Setup KeyLock
Lock ON
Lock OFF
Press Setup for 2 Sec.
to unlock keyPad
Setup Key Lock
Lock On
Lock Off
40
Hide quick links:
Advertisement
Table of Contents
