JTS UF-20R Product Manual page 40

(3. LowCut: base attenuation
Rotate the rotary switch to "3. LowCut. " Push the rotary
switch (or SETUP) to enter the adjustment menu.
The Low Cut is not set.
Rotate the rotary switch one notch clockwise to select
Low Cut (as shown on the right). Push SETUP to save the
setting.
(4. RF Power: RF frequency
Rotate the rotary switch to "4. RF Power" Push the rotary
switch (or SETUP) to enter the adjustment menu.
Rotate the rotary switch to select RF Power.
High → high RF Power
Low → low RF Power
Push SETUP to save the setting.
(5. KeyLock
Rotate the rotary switch to "5. KeyLock. " Push the rotary
switch (or SETUP) to enter the adjustment menu.
Rotate the rotary switch to select lock or unlock.
Push SETUP to save the setting.
(6. Remoset Config: to select or unselect REMOSET settings.
(1) Rotate the rotary switch to "6. Remoset Config. " Push the
rotary switch (or SETUP) to enter the setting menu.
1. Sensitivity
2. Attenuate
3. Low Cut
4. RF Power
Mic Low Cut
Mic Low Cut
1. Sensitivity
2. Attenuate
3. Low Cut
4. RF Power
Mic RF Power
High
Low
4. RF Power
5. Kry Lock
6. Remoset Config
7. Return
Mic KeyLock
Lock ON
Lock OFF
4. RF Power
5. Kry Lock
6. Remoset Config
7. Return
36