Icom ic-7300 Full Manual page 148

17
OPTIONS
Options
IC-PW1/IC-PW1EURO
HF/50 MHz all band 1 kW linear amplifier including an
automatic antenna tuner. An optional OPC-599 is required
for the connection.
AH-740
automatic
tuning antenna
High performance,
automatic high-speed
tuning antenna.
The optional AH-5NV
is available.
nvis kit
SM-50
desktop microphone
Dynamic microphone with
[UP]/[DOWN] switches.
• AH-5NV
nvis kit
Use with the AH-740.
• AH-710
folded dipole antenna
Covers 2 to 30 MHz wide frequency range.
Element length:
Coaxial cable (supplied): 30 m (98.4 ft)
• HM-219
microphone
The same as supplied.
• MB-118
mounting bracket
To mount the transceiver inside a vehicle.
• MB-123
carrying handle
• OPC-420
control cable
A 10 m (32.8 ft) shielded control cable for the AH-4.
• OPC-599
adapter cable
13-pin ACC connector adaptor to 7-pin + 8-pin ACC
connectors.
linear amplifier
HM-36
microphone
Hand microphone with
[UP]/[DOWN] switches.
SM-30
desktop microphone
Desktop microphone
with a low frequency cut
function.
24.5 m (80.4 ft)
AH-2b
antenna element
A 2.5 m (8.2 ft)
long antenna
element for mobile
operation with the
AH-4.
PS-126
dc power supply
• Output voltage: 13.8 V DC
• Maximum output current:
SP-23
external speaker
External speaker with high
and low frequency cut
functions.
• RS-BA1
ip remote control software
NOTE: To remotely control transceivers using the
RS-BA1, BE SURE to comply with your local regulations.
• SP-33
external speaker
Designed for base station operation.
• SP-35
external speaker
Designed for mobile operation.
Approved Icom optional equipment is designed
for optimal performance when used with an Icom
transceiver. Icom is not responsible for the destruction
or damage to an Icom transceiver in the event the
Icom transceiver is used with equipment that is not
manufactured or approved by Icom.
17-2
AH-4
antenna tuner
Automatic antenna
tuner to tune a long
wire antenna for base,
portable, or mobile
HF/50 MHz operation.
CT-17 -
ci v converter
For remote transceiver
control using a PC
25 A equipped with an
RS-232C port.
SP-34
external speaker
External speaker with high
and low frequency cut
functions.