Icom ic-7300 Full Manual page 52

4
RECEIVING AND TRANSMITTING
Operating CW (Continued)
D Sending from the Memory keyer (KEYER)
You can send preset characters using the Memory
keyer function.
Sending
1. Open the KEYER screen in the CW mode.
» KEYER
MENU
2. Push .
TRANSMIT
• The TX status indicator lights red.
L If you want to automatically switch between transmit
and receive, turn the Break-in function ON. (p. 4-15)
3. Touch a desired memory keyer between [M1] and
[M4].
• The touched keyer contents are sent.
4. To stop sending, push
KEYER screen while sending
(Example: sending M1)
KEYER screen while sending
(Example: Repeatedly sending M1)
Key
Touch Sends the Memory keyer contents
sends the Memory keyer contents.
M1~M8 Touch for
L You can change the repeat
1 second
interval setting in "Keyer Repeat
Time" in the CW-KEY SET menu.
(p. 4-21)
Reduces the contest number counter by 1 (001).
–1 L You can change or reset the number in
001 "Present Number" in the KEYER 001 menu.
(p. 4-21)
Touch to display the EDIT/SET screen.
EDIT/SET
.
EXIT
Sending
contents
Displayed
Action
is displayed and repeatedly
Count up trigger
The count up trigger enables the serial number to be
automatically increased after each complete serial
number exchange is sent. (Default: M2)
Count up trigger icon
is displayed on the Memory keyer set to the count up
L
trigger.
L You can change the count up trigger setting in the KEYER
001 menu. (Default: M2) (p. 4-20)
Preset Memory keyer contents
Memory keyer
M1 CQ TEST CQ TEST DE ICOM ICOM TEST
M2 UR 5NN 001 BK
M3 CFM TU
M4 QRZ?
L "001" is the CW contest number.
L If you want to set the Count up trigger to different keyer,
delete "*" (asterisk) from the Memory keyer M2. See
"Keyer memory edit menu (EDIT)" (p. 4-19) for details.
TIP: When you are using an external keypad, you can
send the preset contents without opening the KEYER
screen. See page 18-3 for details.
4-18
Present number counter
Contents