Selecting Channels - Vello FWIRC-N User Manual

Lock Mode
To prevent inadvertent operation of
the Commander, you can deactivate its
controls by setting it to lock mode. This
will disable all of the buttons except for
the power switch and the test button.
To lock the device, press and hold the
FN button for five seconds until the
lock icon [ ] appears on the LCD.
To unlock the device, press and
hold the FN button until the
lock icon [ ] disappears.
14

SELECTING CHANNELS

On the FreeWave IR Commander,
four channels (1, 2, 3, and 4) are
available. You can use this option
to prevent your flashes from being
triggered by another photographer
Channel Lock Icon
working with a similar system nearby.
To select the channel, press the Set
button repeatedly in any mode until the
channel number blinks. Use the Left
and Right [
cycle through channels 1 through 4.
Note: Make sure your slave flashes are set
to the same channel as the Commander.
] navigation buttons to