Setting The Channel; Available Channels - Vello Freewave micro User Manual

Wireless remote shutter release

Hide thumbs Also See for Freewave micro:

Table of Contents

SETTING THE CHANNEL

There are 16 radio frequencies (channels) available

on the transmitter and the receiver. Be sure to set

the same channel on the transmitter and the receiver.

This allows you to use the Freewave Micro Wireless

Remote Control without interference from other

devices using radio frequencies in the same area. The

channel selection pin attached to the included lanyard

helps you to adjust the channels. Please refer to the

channel list below for information about setting the

channels.

Note: Be sure to maintain a minimum distance of 20"

(50 cm) between the transmitter and receiver during

operation to prevent anti-RF interference.

Table of Contents