Compatible Devices; Installing Batteries - Vello FWIRC-N User Manual

COMPATIBLE DEVICES

The Vello FWIRC-N FreeWave IR
Commander is compatible with
Nikon's i-TTL (intelligent through-
the-lens) system. To make full use of
the FreeWave IR Commander, we
recommend using i-TTL-capable hot-
shoe flashes that are fully compatible
with your camera's i-TTL system.
8

INSTALLING BATTERIES

The FreeWave IR Commander is
powered by two AA batteries. To
install batteries, make sure the device
is turned off and follow these steps:
1. Press and slide the battery
compartment cover in the direction
of the arrow to open.
2. Insert batteries in the orientations
indicated by the illustrations inside
the compartment.
3. Close the battery compartment
cover by pressing and sliding it in the
opposite direction of the arrow on
the cover.