Table of Contents
Advertisement
Adjusting Power Output
Flash power output is represented as a
fraction. The 1/1 setting is the full-power
flash, and each successive setting halves
the light output, all the way down to
1/128. You can also fine-tune the flash
output in increments of one-third,
indicated by a hyphen next to the
fraction, first higher and then lower, e.g.,
1/1, 1/2 - , 1/2-, 1/2, 1/4 - , 1/4-, 1/4, 1/8 - ...
To adjust power output:
1. Make sure the desired group is in
manual mode.
2. Press the Set button repeatedly
until the desired power output
blinks, and use the Left and Right
[
] navigation buttons to adjust
the output.
Power Output
21
Advertisement
Table of Contents
