Vello FWIRC-N User Manual page 13

Automatic Power-saving Function
After a designated period of inactivity,
the Commander will automatically
enter power-saving mode to conserve
battery life, and the LCD will display
the standby mode indicator.
To reactivate the Commander, press
the Set button or press your camera's
shutter-release button halfway.
Standby Screen
When reactivating via your camera's
shutter button, standby time will
be controlled by the camera's
settings. When reactivating via the
Commander's Set button, standby
will occur after approximately 5
minutes of inactivity. During long
periods of inactivity, use the power
switch to turn off the Commander.
LCD Illumination
When you turn on the FreeWave IR
Commander or press any button, the
LCD will glow blue for up to six seconds.
13