Mounting The Freewave Ir Commander - Vello FWIRC-N User Manual

MOUNTING THE FREEWAVE IR COMMANDER

To mount the FreeWave IR Commander
on your camera, make sure all devices
are turned off and follow these steps:
1. Looking down at the unit, rotate the
locking wheel counterclockwise to
loosen it.
2. Slide the mounting foot all the way
into your camera's hot shoe.
3. Rotate the locking wheel clockwise
until secure.
To dismount the FreeWave IR
Commander from your camera,
make sure the Commander is
turned off and follow these steps:
1. Looking down at the unit, rotate the
locking wheel counterclockwise to
release it.
2. Slide the mounting foot out of your
camera's hot shoe.
11