I-Ttl Mode - Vello FWIRC-N User Manual

i-TTL MODE

In i-TTL mode, the FreeWave IR
Commander will automatically set
the appropriate flash level via your
camera's intelligent through-the-
lens (i-TTL) metering system data,
calculating the correct power for all
communicating i-TTL compatible flashes.
On the FreeWave IR Commander,
i-TTL mode and EV are set
independently for each group.
16
Setting i-TTL mode: To set a group
to i-TTL mode, follow these steps:
1. Press the Set button repeatedly until
the desired group's mode indicator
blinks.
2. Press the Mode button until the
i-TTL mode indicator appears
onscreen.
i-TTL Mode