Example #3 Configure mac access-group
(Netgear Switch) (Config)#interface 1/0/5
(Netgear Switch) (Interface 1/0/5)#mac ?
access-group
Attach MAC Access List to Interface.
(Netgear Switch) (Interface 1/0/5)#mac access-group ?
<name>
Enter name of MAC Access Control List.
(Netgear Switch) (Interface 1/0/5)#mac access-group b1 ?
in
Enter the direction <in>.
(Netgear Switch) (Interface 1/0/5)#mac access-group b1 in ?
<cr>
<1-4294967295>
(Netgear Switch) (Interface 1/0/5)#mac access-group b1 in
Access Control Lists (ACLs)
NETGEAR 7000 Series Managed Switch Administration Guide
Press Enter to execute the command.
Enter the sequence number (greater than 0) to rank precedence
for this interface and direction. A lower sequence number has
higher precedence.
v1.1, May 2006
7-7