Configuring Static Routes - NetComm NTC-790 User Manual

Configuring Static Routes

9.2
This facility is available on the Routing HTML page.
Some routes are added by default by the Cellular Router on initialisation such as the Ethernet subnet route
for routing to a device on the Ethernet subnet. A PPP route is also added upon obtaining a Wireless PPP
connection.
However, if you have other routers (hence networks) on the Ethernet subnet for example, you may want to
add some more static routes.
Adding Static Routes
Enter the values in the fields as above
Click Add
NOTE that you must increment the Route no by 1 for each route in the Route no field otherwise that route
will be overwritten.
Revision 1.55
March 2009
48
NetComm Limited