How To Establish A Connection Using The Cellular Router In Pppoe Mode - NetComm NTC-790 User Manual

How to establish a Connection using the Cellular Router in PPPoE mode

6.1.4
This facility can be found on the LAN page.
To enable PPPoE mode:
Firstly ensure "Auto Connect" under the "Data Connection" configuration page is disabled.
Next open the "LAN" configuration page.
Specify the APN you wish to use to suit your carrier
In addition you may specify an optional "Service Name"
connected device must use the same service name when connecting.
This facility is particularly useful if you have more than one PPPoE router or modem on a single Ethernet
network.
Finally click save to save your settings and enable PPPoE
Note- Most people do not need to use PPPoE. If you do not know what PPPoE is, odds are you don't need
this.
Revision 1.55
March 2009
.
when a "Service Name" is specified the
.
27
NetComm Limited