Table of Contents
Advertisement
The Active Routing table at the bottom will show the new route added as shown below:
Example:
If you have a router on the Ethernet side of the Cellular Router with a gateway 192.168.1.5 that interfaces
to network 10.123.0.0/16 and you want to get to a device on that network then you enter:
10.123.0.0 in the Destination IP address field
255.255.0.0 in the IP Subnet Mask Field
192.168.1.5 in the Gateway IP address Field
The lower the metric value the higher the priority this routes has over other routes.
Revision 1.55
March 2009
49
NetComm Limited
Advertisement
Table of Contents
