Table of Contents
Advertisement
To connect using a user configured profile
6.1.2
If none of the pre-configured profiles are suitable you may configure a 4
Select Profile Number 4
Make sure that the APN name
APN name to be "apnname4" as an example but yours will be specific to your carrier.
As for the APN, the "User" and "Password" fields
carrier.
You may leave the other profile settings as their default values shown above.
Once you have entered the appropriate detail in this section of the form click "Modify Entry"
this connection profile.
Revision 1.55
March 2009
field is correct. This is very important. The example above shows the
will need to be set appropriately for your specific
24
th
user defined profile as follows:
NetComm Limited
to save
Advertisement
Table of Contents
