NetComm NTC-790 User Manual page 21

For NTC-790, the following band settings options are applicable.
UMTS 850MHz Only
WCDMA ALL
UMTS 850MHz, 2G
2G
All Bands (autoband) = UMTS 850/2100/1900MHz GSM/EDGE/GPRS 900/1800/1900MHz
For NTC-990, the following 900Mhz band setting options are applicable.
UMTS 900MHz Only
WCDMA ALL
UMTS 900MHz, 2G
2G
All Bands (autoband) = UMTS 900/2100/1900MHz GSM/EDGE/GPRS 900/1800/1900MHz
NOTE – After changing the band if the band does not get set correctly or is not reflected on the frequency
field on the "Home" Status page then you may need to reboot the unit by clicking on the Reset Button on
the top right hand corner of the page.
Revision 1.55
March 2009
= UMTS 850 MHz Only
= UMTS 850/2100/1900MHz
= UMTS 850 MHz GSM/EDGE/GPRS 900/1800/1900MHz
= GSM/EDGE/GPRS 900/1800/1900MHz
= UMTS 900 MHz only
= UMTS 900/2100/1900MHz
= UMTS 900 MHz GSM/EDGE/GPRS 900/1800/1900MHz
= GSM/EDGE/GPRS 900/1800/1900MHz
20
NetComm Limited