NetComm NTC-790 User Manual page 46

•
Always Off
•
PPP On DCD is on when the router has established a PPP session with the cellular network
Flow Control
•
Off
•
Hardware
RI Action
Determines how the router controls the state of the serial port RI line
•
Always On
•
Incoming Ring RI is on when an incoming connection request is received.
•
Always Off
Circuit AutoAnswer Rings
Sets the number of incoming rings after which the router will answer incoming circuit switched data calls
Auto Dial Number
Sets the number the router will dial if DTR Auto Dial is enabled ad DTR changes state
Revision 1.55
March 2009
DCD is always off
Serial port flow control off
Serial port uses RTS/CTS flow control
RI is always on
RI is always off
45
NetComm Limited