Warranty; Unpacking - Bradford White Brute BNTH Installation And Operation Instructions Manual

Page 4
EXHAUST VENT CONNECTION
GAS CONNECTION
PRESSURE RELIEF VALVE
TOUCHSCREEN
MANUAL SHUTOFF
GAS VALVE
HEAT EXCHANGER
GAS VALVE
MANUAL SHUTOFF
GAS VALVE
Figure 5. Location of Components, Size 600

1.4 Warranty

Bradford White Brute appliances are covered by a
limited warranty. The owner should complete the
warranty registration at www.BradfordWhite.com.
All warranty claims must be made at www.
BradfordWhite.com. or to an authorized Bradford
White representative. Claims must include the serial
number and model (this information can be found on
the rating plate), installation date, and name of the
installer. Shipping costs are not included in the warranty
coverage.
Some accessory items may be shipped in separate
packages. Verify receipt of all packages listed on
the packing slip. Inspect everything for damage
immediately upon delivery, and advise the carrier of
any shortages or damage. Any such claims should
be filed with the carrier. The carrier, not the shipper,
is responsible for shortages and damage to the
shipment whether visible or concealed.

1.5 Unpacking

The Brute unit is shipped in a single crate with the
following standard components packed with the
appliance. (See Figure 7)
A. Exhaust vent terminal (US only)
B. Air intake terminal
C. Temperature/pressure gauge kit
D. Circulator pump/wire harness (units with
pump)
E. CPVC exhaust pipe section (199-850) (US
only)
F. Outdoor/system sensor kit
G. Flow switch kit (399-850)
H. Alternate size vent/terminal screens
J. Exhaust vent adapter CPVC/ST ST
(750-850)
K. 4x6 PVC adapter with 4x7 PVC pipe section
(750-850) (not to be used on exhaust in
Canada)
1. Remove all packing and tie-down materials.
2. Check the contents of the carton against the
items shown.
B W
RADFORD HITE
WATER INLET
WATER OUTLET
AIR INLET CONNECTION
AIR PRESSURE SWITCH
ON / OFF SWITCH
DRAIN VALVE
CONDENSATE TRAP
AIR/ GAS BLOWER
VENTURI