Brute Elite
1.3 Appliance Overview
See
Figures 1 through
1.4 Warranty
Bradford White's Brute Elite appliances are
covered by a limited warranty.
All warranty claims must be made to an authorized
Bradford White representative. Claims must include the
serial number and model (this information can be found
on the rating plate), installation date, and name of the
installer. Shipping costs are not included in the warranty
coverage.
Some accessory items may be shipped in separate
packages. Verify receipt of all packages listed on the
packing slip. Inspect everything for damage
immediately upon delivery, and advise the carrier of any
shortages or damage. Any such claims should be filed
with the carrier. The carrier, not the shipper, is
responsible for shortages and damage to the
shipment whether visible or concealed.
7.
1.5 Unpacking
The Brute Elite is shipped in a single crate with the
following standard components packed with the
appliance
(see Figure
8):
A. exhaust vent terminal
B. air intake terminal
C. temperature/pressure gauge kit
D. circulator pump/wire harness
E. CPVC exhaust pipe section
F. outdoor/system sensor kit
G. flow switch kit
H. alternate size vent/terminal screens
J. exhaust vent adapter CPVC/ST ST
K. 4x6 PVC adapter with 4x7 PVC pipe section
(750-850) (not to be used on exhaust in Canada)
1.
Remove all packing and tie-down materials.
2.
Check contents of the carton against items shown.
1.6 Dimensions
Dimensions are shown in
Figure 8. Contents of Shipping Package.
Page 9
(US only)
(units with pump)
(80-500) (US only)
(399-850)
(750-850)
Figure
9.