Configuring Parameters On Individual - Bradford White Brute BNTH Installation And Operation Instructions Manual

Page 38
8.5 Configuring Parameters
In this section, we will give you a quick explanation
of how to change parameters on the controller.
1. From the Home Page screen (Menu 11), press
the icon for the controller.
Menu 11. Home Page Screen
2. The Status Summary page for that controller
will appear. See Menu 12
Menu 12. Status Summary Screen
3. Press the Configure button to start a
configuration session for the controller.
Menu 13. Configuration Screen
This screen lists all of the configuration groups
that will be outlined in Section 9.
B W
RADFORD HITE