Page 34
Section 8
Navigating the Touch Screen
Figure 32. Brute with Touch Screen
8.1 The Touch Screen
The Touch Screen is located front and center on
the Brute and allows you to navigate into all of the
functionality and control that is available to setup and
customize your heating and/or hotwater system.
8.2 Using the Touch Screen
A screen saver is programmed into the display. Simply
touch the screen to wake it up.
While under normal operation,
automatically present this Home screen.
1
Menu 1.
Home Screen
Touch Screen
the Touch Screen will
See Menu
The home screen shows a picture of the Brute
controller. The color of the controller depends on the
status of the Brute, as shown below.
Color
Status
Blue
Normal operation
Red
Lockout
Gray
Standby mode (Burner
switch off)
Gray and
Communication
crossed
problem
out
Yellow
Hold state. This could
be Anti short cycle, fan
speed transitions, etc.
Figure 33. Boiler Status Colors
To check the operation of the appliance, press the large
Control Icon on the Home screen. The system will
present a Status Summary screen for the appliance:
Menu 2.
Status Summary
B
W
RADFORD
HITE
Control
Icon