Headset Configuration - ASCOM d62 Configuration Manual

Configuration Manual
Ascom d62 DECT Handset

5.31 Headset configuration

A headset is recommended if you frequently use the handset and/or want to have both
hands free. The headset comes in two versions, that is, microphone on boom and
microphone on cable.
5.31.1 Selection of Headset Type (Corded Headset)
In order to achieve optimal audio quality with the different headset types, it is
recommended to set the corresponding headset type. The default setting is "microphone on
a boom", which means that the audio is optimized for using a headset with microphone on a
boom. The headset type can be changed as follows:
1 Select Connections > Headset.
2 In the Headset type drop-down list, select the corresponding headset type to be
used.
If "User headset profile" is selected, continue with chapter
User headset profile
If the preconfigured headset profiles does not match the headset or the audio performance
is bad, it is possible to configure a headset profile.
1 Select Connections > Headset > User headset profile.
2 In the Name of user headset profile field, enter an appropriate name. The name will
be visible and selectable in the handset menu.
3 In the Headset mic adjustment drop-down list, select the microphone gain to be used.
4 In the Headset speaker adjustment drop-down list, select the speaker gain to be
used.
Note: Changing these parameters may result in a very high sound level which can cause
hearing damage. In addition, these parameters may result in lower sound quality such as
noise and echo. If the audio problems occur, it is noticable for the person listening on the
conversation. Evaluate carefully before applying.
5.31.2 Configuration of headset button
Note: This feature is not applicable for d62 Talker.
It is possible to configure a headset's answer button with a predefined function.
Configure a corded headset button
1 Select Connections > Headset.
2 In Headset type drop-down list, select headset to be used.
3 In the Call with headset button drop-down list, select one of the following:
• Not activated - it is only possible to answer/end a call.
• Last called number - the last called number will be dialled.
• Predefined number - a predefined number will be called (if selected, continue with
step 3)
• Hook off - activates the post-dial function, that is, a dial tone is heard and the
user can enter the number to be called.
4 If needed, in the Predefined number field, enter the number to be dialled when the
headset button is pressed.
25 November 2011 / Ver. E
TD 92639EN
User headset profile.
41