ASCOM d62 Configuration Manual page 38

Configuration Manual
Ascom d62 DECT Handset
Tip: New messages can be displayed upside down to make it easier to read the messages
when for example wearing the handset in a belt. See
Information Upside Down
5.26.1 Configure Message Alerts with Beep Codes
The handset can map beep codes sent from a system/an application to different message
alerts. There are several ways to threat the beep codes:
Beeps according to beep code
Beep code sent from a system/application
Beep code 0
Beep codes 1- 6
Beep code 7
The handset will play the original message alerts that are mapped to the beep codes.
1 Select Settings > Sound and Alert.
2 In the Message alert drop-down list, select "Beeps according to beep code".
High beeps according to beep code
Beep code sent from a system/application
Beep code 0
Beep codes 1- 6
Beep code 7
The handset will play the message alerts that are mapped to beep codes but with a higher
tone.
1 Select Settings > Sound and Alert.
2 In the Message alert drop-down list, select "High beeps according to beep code".
Enhanced beeps according to beep code
Beep code sent from a system/application
Beep code 0
Beep codes 1 -3
Beep code 4
Beep code 5
Beep code 6
Beep code 7
The handset will play extended message alerts that are mapped to the beep codes.
1 Select Settings > Sound and Alert.
2 In the Message alert drop-down list, select "Enhanced beeps according to beep code".
25 November 2011 / Ver. E
on page 42.
5.32 Display New Messages and Call
The handset plays:
No message alert is played
1 - 5, and 10 beeps
Siren
The handset plays:
No message alert is played
1 - 5, and 10 beeps
Siren
The handset plays:
No message alert is played
1 - 3 beeps
3 tones chime
10 beeps
Alarm sweep
Siren
TD 92639EN
35