ASCOM d62 Configuration Manual page 12

Configuration Manual
Ascom d62 DECT Handset
performed. The handset's User ID will automatically be set to the same as the
extension number.
Tip: The User ID can be viewed in the handset by navigating to the menu:
Admin menu > Device info > User ID.
See also examples of handset configurations that can be made in chapter
Configuration
Subscribe the handset
1 Assign an extension number in the DECT/IP-DECT system for the handset. See the
corresponding manual for the DECT/IP-DECT system.
2 Subscribe the handset towards the DECT/IP-DECT system. The subscription procedure
is described in User Manual, Ascom d62 DECT Handset, TD 92477GB.
In order to easily identify the handset, both the IPDI and the User ID are shown in the
handset when initiating the subscription procedure.
25 November 2011 / Ver. E
on page 18.
TD 92639EN
5 Handset
9