Cisco 7200 VXR router User Manual page 91

Step 3
Step 4
Table 2-3 Cisco 7200 VXR Component List
Component Description
Chassis Cisco 7204VXR or Cisco 7206VXR chassis configured with a network
processing engine, I/O controller, up to two AC or DC power supplies, up to
four port adapters for the 4-slot chassis or up to six port adapters for the 6-slot
chassis (blank port adapters should be installed in empty port adapter slots),
and up to two PCMCIA Flash Disks or Flash memory cards.
Accessories: The following accessories might arrive in separate shipping containers:
Rack-mount and Two rack-mount brackets, two cable-management brackets, eight M4 x 8-mm
cable-management Phillips flathead screws, and six 10-32 x 3/8-inch slotted binderhead screws
kit
Power cables Up to two power cables
Documentation If ordered, router hardware and software documentation set and the Cisco
Documentation CD-ROM package
1 Titles and quantities of documents will vary. You must order the type and quantity of documentation sets when you order the
hardware.
Verify that the port adapters installed in your Cisco 7200 VXR router match the
port adapter types on the packing list.
Proceed to the "Site Log" section on page 2-24, then to the chapter "Installing a
Cisco 7200 VXR Router" to begin the installation.
Checking the Shipping Container Contents
1
Preparing for Installation 2-23
Received