Cisco 7200 VXR router User Manual page 152

Viewing Your System Configuration
The following sample output of the show version command (abbreviated sh ver) shows an
NPE-300 installed in the Cisco 7206VXR running Cisco IOS Release 12.0(3)T.
Router# sh ver
Cisco Internetwork Operating System Software
IOS (tm) 7200 Software (C7200-JS-M), Released Version
12.0(19980705:021501) Copyright (c) 1986-1998 by cisco Systems, Inc.
Compiled Thu 15-Oct-98 02:20 by xxxxx
Image text-base: 0x600088C4, data-base: 0x60FA6000
ROM: System Bootstrap, Version 12.0(3)T, RELEASED SOFTWARE
BOOTFLASH: 7200 Software (C7200-BOOT-M), Released Version
12.0(19980705:021501)
Router uptime is 1 day, 20 hours, 31 minutes
System restarted by power-on
System image file is
"tftp://223.255.254.253/muck/gshen/c7200-js-mz.120.0825.4"
cisco 7206VXR (NPE300) processor with 61440K/20480K bytes of memory.
R7000 CPU at 262Mhz, Implementation 39, Rev 1.0, 256KB L2, 2048KB L3
Cache
Six slot VXR midplane, Version 2.0
Last reset from power-on
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
8 Ethernet/IEEE 802.3 interface(s)
3 FastEthernet/IEEE 802.3 interface(s)
125K bytes of non-volatile configuration memory.
20480K bytes of Flash PCMCIA card at slot 0 (Sector size 128K).
8192K bytes of Flash PCMCIA card at slot 1 (Sector size 128K).
4096K bytes of Flash internal SIMM (Sector size 256K).
Configuration register is 0x0
Use the show diag command to determine what type of port adapters and I/O controller
(with or without the Fast Ethernet port) are installed in slot 0 through slot 4 of your
Cisco 7204VXR or slot 0 through slot 6 of your Cisco 7206VXR. You can also use the
show diag slot command to display information about a specific port adapter slot.
4-24 Cisco 7200 VXR Installation and Configuration Guide