Table of Contents
Advertisement
SERVICE PROGRAM MODE
4.2.3 TEST PATTERN PRINTING (SP5-902)
1. Input the level 3 number for the test pattern you need.
2. Press the / (Interrupt) key on the display to access the copy mode display.
3. Select the required copy features such as paper size, image density, and
reproduction ratio.
4. Press the q key to print the test pattern.
5. After checking the test pattern, exit copy mode by pressing the / (Interrupt)
key again.
6. Exit SP mode.
Test Pattern Table (SP5-902: Test Pattern Printing)
No.
Test Pattern
0
No Print
1
Vertical Lines (single dot)
2
Horizontal Lines (single dot)
3
Vertical Lines (double dots)
4
Horizontal Lines (double dots)
5
Grid Pattern (single dot)
6
Grid Pattern (double dots)
7
Alternating Dot Pattern
8
Full Dot Pattern
9
Black Band
10 Trimming Area
11 Argyle Pattern
12
13 16 Grayscales (Horizontal)
14 16 Grayscales (Vertical)
15 16 Grayscales (Vert./Hor.)
16 16 Grayscales (Vert./Hor. Overlay)
16 Grayscales with white lines
17
(Horizontal)
17 Grayscales with white lines
18
(Vertical)
18 Grayscales with white lines
19
(Vert./Hor.)
20
No.
21
22
23
24
25
26
27
28
29
30
31 8 Grayscales (Horizontal, Odd)
32 8 Grayscales (Vertical, Odd)
8 Grayscales with white lines
33
(Horizontal, Odd)
8 Grayscales with white lines
34
(Vertical, Odd)
35 8 Grayscales (Horizontal, Even)
36 8 Grayscales (Vertical, Even)
8 Grayscales with white lines
37
(Horizontal, Even)
8 Grayscales with white lines
38
(Vertical, Even)
39
40
4-38
17 May, 1999
Test Pattern
Advertisement
Table of Contents
