Peripheral Configuration - NEC Express 5800/320Lb-R User Manual

4-14

Peripheral Configuration

Select "Peripheral Configuration" on the Advanced menu to display the following screen.
Serial Port A:
Serial Port B:
F1 Help
Esc Exit
See the table below for setup options on the screen.
Make sure to avoid any conflict in the interrupt requests or the base I/O
IMPORTANT:
addresses.
Option Parameter
Serial Port A Disabled
Serial Port B 3F8, IRQ 3
[3F8, IRQ 4]
[2F8, IRQ 3]
2F8, IRQ 4
3E8, IRQ 3
3E8, IRQ 4
2E8, IRQ 3
2E8, IRQ4
Auto
Phoenix BIOS Setup Utility
Advanced
Peripheral Configuration
[3F8, IRQ 4]
[2F8, IRQ 3]
Select Item -/+ Change Values
Select Menu Enter Select
Description
Enable or disable the serial port A and
B, or specify a base address and
*1
interrupt.
*2
*1 Factory setting for the serial port A
*2 Factory setting for the serial port B
Item Specific Help
Disables serial port 1
or sets the base
address/IRQ of
serial port 1.
F9 Setup Defaults
Sub-Menu F10 Save Changes & Exit
Your Setting
[ ]: Factory-set