NEC Express 5800/320Lb-R User Manual page 57

(2) Status LED 1 of both PCI modules are red
PCI#1
Status DISK Status
LED 2 Access LED 2
LED
Off Off Off
Green Off Off
Off Off Green
(3) Status LED 1 of only PCI module 1 is red
PCI#1
Status DISK Status
LED 2 Access LED 2
LED
Off Off Amber
Green Off Amber
Off Off Off
PCI#2
DISK
Description
Access
LED
Off On standby (AC power
is supplied through the
cord, but the system
has not been powered
on yet.)
Off The PCI module 1 is
performing diagnosis
(Diag).
Off The PCI module 2 is
performing diagnosis
(Diag).
PCI#2
DISK
Description
Access
LED
Amber The PCI module 1 is on
standby (The PCI
module 1 has not been
powered on yet.)
The PCI module 2
operates in simplex
mode.
Amber The PCI module 1 is
performing diagnosis
(Diag).
The PCI module 2
operates in simplex
mode.
Off Only the PCI module 1
is on standby (AC
power is supplied
through the cord, but
the system has not
been powered on yet.)
AC power is not
supplied to the PCI
module 2.
2-21
Action
After turning on the power,
wait for the OS to start. When
the OS starts and duplex
mode is established, the
indications will return to
normal. If they do not get
back to normal, remount the
PCI module.
If the problem persists,
contact your sales agent.
Wait for the OS to start. When
the OS starts and duplex
mode is established, the
indications will return to
normal.
Wait for the OS to start. When
the OS starts and duplex
mode is established, the
indications will return to
normal.
Action
Start the PCI module 1 from ft
server utility (See Chapter 5).
Remount the PCI module 1.
If the problem persists,
contact your sales agent.
Wait for the PCI module 1 to
start. When the PCI module 1
starts and duplex mode is
established, the indications
will return to normal.
Check if the power cord is
connected correctly.
Check the condition of
breaker and UPS.
Check if the power unit is
connected correctly.
Remount the PCI module 2.
If the problem persists,
contact your sales agent.