Table of Contents
Advertisement
5-26
Monitoring PCI Module
To monitor the PCI modules and the components on the PCI modules, refer to the [PCI Module]
tree. To see the information on the [PCI Module] tree, select the target PCI module from [PCI
Module] in the [FTServer] tree.
You can see the following information on the PCI modules and the components on the PCI modules
of the [PCI Module] tree.
(This section describes the general information screens of the PCI modules. The components on the
PCI modules are described later.)
General
Allows the configuration and other information of the PCI modules to be viewed.
Maintenance
Allows the start/stop, MTBF information clear, and diagnosis of the PCI modules to be
provided. See "Maintenance of NEC Express5800/ft series" described later for the start/stop
and MTBF information clear of the CPU modules.
Update
Allows the device identification information of the PCI modules to be viewed. The detailed
device identification information can be checked by selecting [ESMPRO MIB]
tree→[Hardware] tree→[Field Replaceable Unit] tree.
Advertisement
Table of Contents
