Table of Contents
Advertisement
5-60
Hook up the management PC to LAN.
108.
Power off and on the main unit to reboot the system.
109.
After one reboot, the main menu will appear on the management PC's screen, on which
you can perform hardware setup and run utilities.
If the configuration information (CSL_LESS.CFG) in the FD has already
TIPS:
been loaded, the main menu will appear without a reboot.
When the main menu appears on the management PC's screen, eject the floppy disk.
110.
If you use other tools, exit NEC EXPRESSBUILDER and power on/off the main unit.
111.
IMPORTANT:
uncheck [Reset] of [Activate] in [Property] dialog box.
After completing the procedure for remote console connection,
Advertisement
Table of Contents
