Table of Contents
Advertisement
Monitoring Configuration
Select "Monitoring Configuration" on the Advanced menu to display the following screen.
Option ROM Scan Monitoring:
Option
Boot Monitoring:
Boot Monitoring Time-out Period:
POST Pause Monitoring:
POST Pause Monitoring Time-out:
F1
Esc Exit
See the table below for setup options on the screen.
Option
Parameter Description
Option ROM
Disabled
Scan Monitoring
[Enabled]
Option ROM
1 - [5] - 20
Monitoring
Time-out
Boot Monitoring
Disabled
[Enabled]
Boot Monitoring
1 - [10] - 20 Specify the boot monitoring time-out period. This
Time-out Period
POST Pause
Disabled
Monitoring
[Enabled]
Phoenix BIOS Setup Utility
Advanced
Monitoring Configuration
[Disabled]
ROM
Monitoring
[5]
[Enabled]
[8]
[Enabled]
[3]
-/+
Change
Select Item
Enter Select
Sub-Menu
Select Menu
Displayed only when "Enabled" is selected for "Option ROM Scan
Monitoring", "Boot Monitoring" or "POST Pause Monitoring".
Enable or disable the Option ROM scan monitoring
feature.
Specify the Option ROM monitoring time-out
period. This option is displayed only when
"Enabled" is selected for "Option ROM Scan
Monitoring".
Enable or disable the boot monitoring feature. This
function is unique to the NEC Express5800/ft
series: detects errors until the OS boots up, and
immediately reboots the OS upon detection of an
error. (For details, see "Behavior at Occurrence of
Error" in Chapter 2.) Enable this function if NEC
ESMPRO Agent is installed on the OS. Disable this
function if NEC ESMPRO Agent is not installed or
when you install the OS. Otherwise, the OS will
boot up after "Specified boot timeout."
option is displayed only when "Enabled" is selected
for "Boot Monitoring". If you specify a shorter period
of time to "Boot Monitoring Time-out Period", the
time until rebooting can be reduced. When there is
no external device connected, it is possible to set a
shorter period of time, but 3 minutes or longer is
recommended. Appropriate value for the setting
varies depending on your environment. Therefore,
when changing this setting, evaluate it thoroughly
after constructing the environment.
Enable or disable the POST monitoring feature
during boot-up restriction.
Item Specific Help
Option ROM Scan
Monitoring features
F9
Setup
F10 Save Changes & Exit
Your Setting
4-15
Advertisement
Table of Contents
