Table of Contents
Advertisement
Advanced
Select "Advanced" on the Advanced menu to display the following screen.
Boot-time Diagnostic Screen:
RomPilot Support:
POST Error Pause:
F1
Help
Esc Exit
See the table below for setup options on the screen.
Option
Parameter
Boot-time
[Disabled]
Diagnostic Screen
Enabled
RomPilot Support
[Disabled]
Enabled
Post Error Pause
[Enabled]
Disabled
"RomPilot" is a BIOS feature for communications with the NEC Management
TIPS:
Workstation Application (NEC MWA). To use the NEC MWA for management of the server,
select "Enabled" for "RomPilot Support." Use of the RomPilot features requires setups for
the NEC MWA.
Phoenix BIOS Setup Utility
Advanced
Advanced
[Disabled]
[Disabled]
[Enabled]
Select Item
Select Menu
-/+
Change Values
Select Item
Enter Select
Select Menu
Description
Specify whether to display the Power On
Self-Test (POST) screen at start-up. If
"Disabled" is selected, the NEC logo
appears while POST is in progress. (To
display POST check results, press Esc.)
If "RomPilot Support" is set to "Enabled" or
"Console Redirection" is set, this option is
unconditionally set to "Enabled".
Enable or disable the RomPilot (the remote
console and remote drive features during
OS start-up). If this option is set to
"Enabled", "Boot-time Diagnostic Screen" is
unconditionally set to "Enabled".
Specify whether to stop POST at the end of
POST when an error occurs during POST.
Item Specific Help
Display the diagnostic
screen during POST
instead of the Logo.
The boot-time diagnostic
screen is redirection
or rompilot is enabled.
F9 Setup Defaults
Sub-Menu
F10 Save Changes & Exit
4-11
Your Setting
[
]: Factory-set
Advertisement
Table of Contents
