Table of Contents
Advertisement
8-28
Replacing CPU
Follow the steps below to replace a failed CPU:
Use Data Viewer of NEC ESMPRO Manager to check the failed CPU.
91.
Remove the CPU module.
92.
Replace the CPU.
93.
Install the CPU module.
94.
Start the CPU module from ft server utility or NEC ESMPRO Manager.
95.
In the initial setting, the server will start up automatically upon mounting the PCI module.
If it is set not to start up automatically, use Data Viewer of NEC ESMPRO Manager or ft
server utility to start it.
Advertisement
Table of Contents
